Features include:

• Heavy cabinet will not move during play, yet it it is easy to move for cleaning or vacuuming.
• Cabinet and legs are covered with a heavy, glossy vinyl which is resistant to wear and use.
• The vinyl on the legs and the leg materials will resist denting by a vacuum cleaner and use.
• New red, white, and blue play surface is especially cold-pressed at the factory under a one hundred ton press process to ensure that all play surfaces are perfectly flat.
• Precision air flow is assured by an enclosed air delivery plenum which is engineered to provide maximum air delivery to each air hole in the playsurface.
• Playing surface is thick High Pressure Laminate - the same as traditional kitchen countertops to ensure long-term play and attractiveness.
• The graphics are embedded - beneath a layer of clear, wear proof melamine that will not scratch off.
• Play surface is 1" thick.
• The aluminum rails make for super-fast play.
• Rubber leg boots assure a perfect leveling and eliminates any table movement associated with a screw in leg leveler.
• Toll-free technical and assembly information line allows you to talk directly to an engineer if ever needed.
• Game has an on/off switch.
• Uses a specifically engineered, UL-approved, high output, low noise motor which plugs into any standard electrical outlet.
• Game puck return features no moving parts to ensure easy play and start up after each goal.
• Molded corners eliminate any rough edges while allowing for continued fast play.
• Game assembly takes less than 30 minutes with all necessary parts. Complete instructions included for ease of assembly.
• All game components are exclusively engineered by Carrom using its 100+ years of game and toy making experience and expertise.
• Game is UL tested and approved for consumer safety where appropriate.
• This game is finely constructed by Carrom in Ludington, Michigan using only the most durable of construction materials to provide years of rugged playtime enjoyment.
• UL Approved Electric High Output Motor with 100 Cubic Feet per Minute Air Output
• Aprons Are ¾” Thick 45 Pound Particleboard with Spektrum Melamine on Exterior
• Playsurface is 1” Thick
• Playsurface is Manufactured Using a Cold Press Process for Assured Flatness
• Playsurface has .060” High Pressure Laminate with Impregnated Graphics for Long Lasting Appearance
• Playsurface is Supported by Steel “beams”
• ABS Puck Catcher is Designed to Eliminate Hang-ups of Puck and for Quick Puck Return
• Puck Catcher Allows for Easy Addition of Optional Scoring Unit
• Legs are Miterfold Construction Covered with Black Vinyl
• Legboots Allow for Easy and Accurate Leveling
• Aluminum Side and End Rails Make for Fast Play
• Comes with Round Pucks - 1 Black, 1 Blue
• 6’ Game Table Size When Setup - 72 7/16” Long ; 38 7/16” Wide; 31 9/16” High
• 6’ Carton Dimensions – 75 ¼” x 42” x 8” - 14.6 cu. ft.
• 6’ Cabinet Weight Approximately 175 Pounds without Scoring Unit

You can purchase this item at airhockeytablesdirect.com