Burr Oak foosball table

Features include:

• Heavy, 170 pound cabinet will not move during play, yet it is easy to move for cleaning or vacuuming.
• Cabinet and legs are covered with a heavy, glossy vinyl which is resistant to wear and use.
• The vinyl on the legs and the leg materials will resist denting by a vacuum cleaner and use.
• Rods are heavy duty triple chrome plated, same as car bumpers to ensure long term smooth action and attractive looks.
• Players are hand painted - No two are exactly the same. Each team, however, has identical uniforms to ensure long term play and attractiveness.
• Rubber handles provide a sure, cushioned grip on the non-bending polished control rods.
• Single Goalie - for the traditional foosball game; Three Player Goalie – for tournament style play.
• Playfield is perfectly flat with corner inserts for the single goalie option to keep the ball in active play.
• Playfield surface is sheet coated to withstand extreme abuse ensuring long term play and attractiveness.
• Rubber leg boots assure perfect leveling and eliminate any table movement associated with a screw in leg leveler.
• Special, self aligning bearings at all rod to cabinet contact areas completely eliminate any alignment problems while assuring great spin action. These special bearings are pre-assembled into the cabinet for exactness and your convenience.
• Solid steel reinforcement rods and hard walnut supports are used to assure that the playfield remains perfectly level for years to come.
• Toll Free technical and assembly information line allows you to talk directly to an engineer if ever needed.
• Game assembly takes less than 90 minutes. All necessary parts and complete instructions are included with the game for easy assembly.
• All game components are exclusively engineered by Carrom using its 100+ years of game and toy making experience and expertise.
• Game is UL tested and approved for consumer safety where appropriate.
• This game is finely constructed by Carrom in Ludington, Michigan using only the most durable of construction materials to provide years of rugged playtime enjoyment.
• Cabinet is Constructed Entirely of 1” Thick Particleboard, Covered in Burr Oak Melamine and Assembled Using a Steel to Steel Assembly Technique for Superior Cabinet Strength
• Playsurface is 3/8” Thick MDF (Medium Density Fiberboard) with a .030” Thick High Pressure Laminate Playing Surface.
• Graphics are Screen Printed Using Enamel for Wear Resistance.
• Play Surface’s Assured Flatness is Achieved by Two Steel Rod Supports Underneath the Play Surface
• Three Player Goalie, Same as Commercial Game
• Legs are Miterfold Construction Covered with Black Vinyl and Legboots for Easy and Accurate Leveling
• Legs Attach Using (4) 3/8-16 Bolts
• Rods are Solid 5/8” Diameter Triple Chrome Plated Steel
• Patented Rod Bearings
• Cushioned Rubber Handles Allow for Precise Player Control
• Ball Return is High Impact Styrene Injection Molded
• Size When Completely Setup Length 54”; Width of Cabinet 28 3/4”; Width with Longest Rod Protruding from Cabinet 50 5/16”; Height 36”
• Carton Dimensions – 56 ½” x 34 ¼” x 9” – 10.1 cu.ft.
• Cabinet Weight Approximately 173 Pounds
• Approximate Assembly Time of 1 ½ Hours